Study on Transformation Features of Carburizing Cr-Mo Steels.
نویسندگان
چکیده
منابع مشابه
Thermodynamic Simulation of Gas Carburizing of Steels
Simulation of metallurgical processes has been the subject of intense research due to the reduced number of experiments required for controlling the process as well as time and energy savings it allows. In gas carburizing of steel parts, the amount of carbon at the surface of carburized parts is the most important specification of the process in terms of achieving the desired metallurgica...
متن کاملEffect of Zr Addition on Mechanical Properties of Cr-Mo Plastic Mold Steels
We investigated the effects of the additions of Zr and other alloying elements on the mechanical properties and microstructure in Cr-Mo plastic mold steels. The addition of alloying elements changed the microstructure of the normalized samples from the upper bainite to lower bainite due to the increased hardenability. The tempering temperature influenced the strength and hardness values, especi...
متن کاملMechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel
The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...
متن کاملExperimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel
This paper shows cxpcrinicn~~~l results concerning thc lnartcnsitic transcormation and the transfor1nation-in(i~1cc(I plasticity undcr multinsial loading. The matcrial investigated is a Cr-Ni-Mo-Al-Ti steel, which is suhrnitlcd to :I y--)cr.' nlartcnsitic phasc: transformation undcr an applicd strcss. The specimens are thin tubes loadcd in ~cnsion-~orsion. The ~csts wcrc specially dcsigncd to p...
متن کاملThe Effects of Cr and Al Addition on Transformation and Properties in Low-Carbon Bainitic Steels
Three low-carbon bainitic steels were designed to investigate the effects of Cr and Al addition on bainitic transformation, microstructures, and properties by metallographic method and dilatometry. The results show that compared with the base steel without Cr and Al addition, only Cr addition is effective for improving the strength of low-carbon bainitic steel by increasing the amount of bainit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1966
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.52.7_1061