Study on Tool Wear During Milling CFRP under Dry and Chilled Air Machining
نویسندگان
چکیده
منابع مشابه
Prediction of Tool Wear from Machining Parameters by Response Surface Methodology in End Milling
Tool wear increases cutting force, vibration, temperature, etc in end milling and reduces surface finish of the machined work piece. Mathematical model has been developed to predict the tool wear in terms of machining parameters such as helix angle of cutting tool, spindle speed, feed rate, axial and radial depth of cut. Central composite rotatable second order response surface methodology was ...
متن کاملExperimental Study on Milling CFRP with Staggered PCD Cutter
Carbon fiber reinforced plastics (CFRP) have good physical properties, such as high specific strength and high specific modulus. However, cutting delamination, tearing and burr, etc. often occur in the machining process of CFRP, which results in the uncontrollability of machining surface quality and serious tool wear. In this paper, milling of CFRP with a staggered cutter was carried out, the c...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملFuzzy Neural Network Modelling for Tool Wear Estimation in Dry Milling Operation
Tool failure may result in losses in surface finish and dimensional accuracy of a finished part, or possible damage to the work piece and machine. This paper presents a Fuzzy Neural Network (FNN) which is designed and developed for machinery prognostic monitoring. The FNN is basically a multi-layered fuzzy-rule-based neural network which integrates a fuzzy logic inference into a neural network ...
متن کاملInfluence of machining cycle of horizontal milling on the quality of cutting force measurement for the cutting tool wear monitoring
The cutting tools are today used a lot by industry and they are expensive, so it was interesting to optimize their use, by developing a predictive method of their wear, particularly, the flank wear Vb. For this task, the flank tool wear was measured in off-line using a binocular microscope, whereas, the cutting forces are recorded by means of a dynamometer (Kistler 9255B). The acquired signatur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.04.073