Study on Tool Life in Turning Carbon Steels
نویسندگان
چکیده
منابع مشابه
Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولTool Damage and Adhesion Effects in Turning and Drilling of Hardened Steels
Noteworthy results have been obtained in the turning and drilling of hardened high-strength steels using tungsten carbide based cutting tools. In a finish turning process, it was seen that surface roughness and tool flank wear followed very different trends against cutting time. The suggested explanation for this behaviour is that the profile cut into the workpiece surface is determined by the ...
متن کاملTool Life, Wear Rates, and Surface Quality in Hard Turning
An on-going comparative study of wear rates and tool lives under varying cutting parameters is presented in this paper, along with results indicating the abilities and limitations of the hard turning process to produce finished surfaces with acceptable roughness and integrity. To date, the study has consisted of thirteen combinations of machining conditions. The tests were performed with four d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1964
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.30.206