Study on the Optimization Field Welding Conditions of Low Heat-Input Pluse MIG Welding Process for 5052 Aluminum Alloy Sheets
نویسندگان
چکیده
منابع مشابه
Research on Thermal Process of MIG Welding of Aluminum Alloy with Longitudinal Magnetic Field
In order to study MIG welding process of aluminum alloy with longitudinal magnetic field, thermal efficiency with longitudinal magnetic field was analyzed, as well as softening behavior of heat-affected zone (HAZ) and base metal were investigated. The results showed that under the action of longitudinal magnetic field, welding current decreased and resultingly total heat input reduced as the ex...
متن کاملEffect of Welding Heat Input on the Intermetallic Compound Layer and Mechanical Properties in Arc Welding-brazing Dissimilar Joining of Aluminum Alloy to Galvanized Steel
The effect of weld heat input on the formation of intermetallic compound (IMCs) layer during arc welding–brazing of aluminium and steel dissimilar alloys, was investigated through both finite element method (FEM) numerical simulations and experimental measurements. The results of FEM analysis as well as welding experiments indicated that increasing weld heat input increases the thickness of IMC...
متن کاملWelding Aluminum Alloy 6061 with Opposing Dual Torch Gtaw Process
Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...
متن کاملstudy on heat generation and distribution during friction stir welding of aa1100 aluminum alloy
in this article effects of friction stir welding (fsw) tool rotational and traverse speeds were studied on heat generation and temperature distribution in welding zone of aa1100 aluminium alloy. computational fluid dynamics method was used to simulate the process with commercial cfd fluent 6.4 package. to enhance the accuracy of simulation in this study, the welding line that is located workpie...
متن کاملStudy on Evaluation Method of Aluminum alloy Pulse MIG Welding Stability Based on Arc Voltage Probability Density
Bring forward a new analytical method in order to evaluate the stability of the process of aluminum alloy pulsed MIG welding. The ratio of the first and the second peak in arc voltage signal probability density was selected to evaluate aluminum alloy pulse MIG welding stability. By calculating the arc voltage signal probability density from 80 sets of welding experiments, the ratio of the two p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Welding and Joining Society
سال: 2011
ISSN: 1225-6153
DOI: 10.5781/kwjs.2011.29.1.080