Study on the Microstructure and Mechanical Properties of a Ti/Mg Alloy Clad Plate Produced by Explosive Welding
نویسندگان
چکیده
In this paper, the microstructure and properties of a Ti/Mg alloy clad plate manufactured by explosive welding were studied. The bonding interface was inspected ultrasonic examination (US). composition characterized OM SEM. Properties tensile test, shearing microhardness test electrochemical corrosion. results showed that made up straight areas wavy areas. areas, element diffusion occurred across interface. Additionally, in melting zone Mg layer near to Lots light particles embedded on zone. Tensile comparable with Ti sheet ultimate strength demonstrated an 18% increase. about 68–87 MPa. higher than original sheets from 300 ?m away. At over ?m, decreased approached sheets. Compared area, hardness area close increased 12%. Corrosion corrosion potential (Ecorr) absolute value 24%, current density (icorr) 4 orders magnitude lower, compared sheet. It clear resistance Cladding would improve industrial applications magnesium materials.
منابع مشابه
Thermobimetals Mechanical Properties Produced by Explosive Welding with Rolling
We used explosive welding with rolling to produce tliermobimetals on the basis of beryllium bronze and alloys of nickel. It gave us possibility to obtain magnetic and 11011magnetic tliermobilnetals possessi~lg high pllysical and mechanical propel-ties.
متن کاملA new approach to predict of mechanical properties at the interface of Aluminium/Copper explosive cladding by explosive scarf welding
Abstract: The purpose of this study is to produce scarf joint through explosive welding process (EXW). The scarf weld is a process in which the final bond interface is oblique. With applying the explosive welding technique, this joint can create a metallic bond between similar or dissimilar metals. In this study, chamfered end of aluminum and copper plates were joined explosively and named scar...
متن کاملa study on insurer solvency by panel data model: the case of iranian insurance market
the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.
Effect of Welding Parameters on Microstructure and Mechanical Properties of Cast Fe-40Al Alloy
Friction welding of cast Fe-40Al alloy was carried out at 1000 rmp for various friction times, friction pressures, and forging pressures. The microstructures of the interface of welded samples were analyzed by optical and scanning electron microscopy (SEM). Micrographs demonstrated that excellent welding formed continuously along the interface, except for samples welded for 3 s. Chemical compos...
متن کاملStudy on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel
In the present study, an ultrafine grained (UFG) 304L stainless steel with the average grain size of 300 nm was produced by a combination of cold rolling and annealing. Weldability of the UFG sample was studied by Nd: YAG laser welding under different welding conditions. Taguchi experimental design was used to optimize the effect of frequency, welding time, laser current and laser pulse duratio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2022
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met12030399