Study on Road Friction Database for Traffic Safety: Construction of a Road Friction-Measuring Device
نویسندگان
چکیده
This study focuses on the possibility of constructing a database friction coefficients for actual roads from viewpoint traffic safety. A measurement algorithm is established to construct road friction-measuring device. Next, tires are selected use in measurements and their characteristics measured using bench tire characteristic tester. The measuring device designed constructed based these characteristics. Finally, this device, results two types surfaces presented.
منابع مشابه
Geometric design safety estimation based on tire–road side friction
A closed-loop drive–vehicle–road–environment system (DVRES) model was established using Adams/Car and Matlab/Simulink. Dynamic responses of lateral tire forces based on tire–road side friction and road geometric characteristics are used to investigate vehicle side slip for geometric design safety estimation. The root mean square, the maximum values of lateral tire forces, comfort limit on curve...
متن کاملRoad traffic injury on rural roads in Tanzania: measuring the effectiveness of a road safety program.
OBJECTIVE Road traffic injuries (RTIs) are a major public health burden, especially in low- and middle-income countries. There is limited data on RTIs in low-volume, rural African settings. This study attempted to survey all individuals living in households within 200 m of two low-volume rural roads in Tanzania and to collect data on RTIs. METHODS Local communities and users of the Bago to Ta...
متن کاملSlip-based Estimation of Tire|road Friction
An approach to estimate the tire{road friction during normal drive using only the wheel slip, that is, the relative diierence in wheel velocities, is presented. The driver can be informed about the maximal friction force and be alarmed for sudden changes. Friction related parameters are estimated using only signals from standard sensors in a modern car, and the physical relation between these p...
متن کاملRubber friction for tire tread compound on road surfaces.
We have measured the surface topography and calculated the surface roughness power spectrum for an asphalt road surface. For the same surface we have measured the friction for a tire tread compound for velocities 10(-6) m s(-1) < v < 10(-3) m s(-1) at three different temperatures (at -8 °C, 20 °C and 48 °C). The friction data was shifted using the bulk viscoelasticity shift factor a(T) to form ...
متن کاملSlip-based tire-road friction estimation
Tire-road friction is estimated using the wheel-slip computed from standard sensor signals. A parametric model is estimated using an adaptive lter supported by a fault detector. Results from extensive eld trials are presented. An approach to estimate the tire{road friction during normal drive using only the wheel slip, that is, the relative diierence in wheel velocities, is presented. The drive...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Inventions
سال: 2022
ISSN: ['2411-5134']
DOI: https://doi.org/10.3390/inventions7040090