Study on plane magnetic abrasive finishing. (3rd report). On the finishing characteristics of non-ferromagnetic substances.
نویسندگان
چکیده
منابع مشابه
Measurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملeffect of the magnetic abrasive finishing (maf) parameters on ball screw finishing process
0
متن کاملThe Concentration’s Influence of the Abrasive Granules Particles on the Vibratory Finishing Optimization
The already initiated studies are based on size and forms of abrasive grains, but few studies have addressed the influence on the concentration of abrasive grains. This research has been done to remove some of the mysteries associated in the media "abrasives" or "chips" used in vibratory and barrel finishing, this process included within the functions and characte...
متن کاملInvestigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube
In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...
متن کاملInvestigation of Magnetic Abrasive Finishing on Inner Surface of AL 6061 Tube
In magnetic abrasive finishing (MAF), abrasive grains as a tool move on surface and can remove chip from surface of work piece. In this study AL 6061 tube was considered as the work piece and the effect of finishing parameters such as gap distance between tube and poles, rotational speed of tube, abrasive ration and finishing time on surface roughness was investigated. The mixture of ferromagne...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1989
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.55.1271