Study on Non-Metallic Inclusions in Laser-Welded TRIP-Aided Nb-Microalloyed Steel

Effect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel

An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...

non-linear study of various slit shear walls in steel structures

seismic retrofit strategies have been developed in the past few decades following the introduction of new seismic provisions and the availability of advanced materials and methods. it can be observed that new approaches to deal with more lateral forces are more innovative and more energy absorbent. in line with this, there is a growing trend toward the use of steel shear walls as a system with ...

Study on Microstructure and Mechanical Properties of Laser Welded Joints of 1.7225 Steel

The aim of the present study is to investigate the mechanical and microstructural properties of 1.7225 steel in laser welding process using Nd:YAG pulsed laser device and then to determine the optimal focal length relative to the part in the welding area. After welding, microstructural characterization, microhardness and tensile tests were performed. Evaluations showed that the optimal focal le...

Correlation of Energy, Deformation and Fractographic Parameters of Microalloyed Steel Welded Joint Fracture

Toughness is a complex material characteristic that is viewed from multiple aspects and is influenced by numerous factors. It is very important to have ability to assess toughness, i.e. to determine ductile or brittle material behaviour at any specific time. Beside total impact energy obtained at Charpy instrumented pendulum, the use of additional parameters such as lateral extension measuremen...

Study of Non - Metallic Inclusions in Alloy 825 Hans