Study on Model Based Combustion Control of Diesel Engine with Multi Fuel Injection

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prediction of Physical Delay Period RiDirect Injection Diesel Engine Combustion

A semi-empirical mathematical model for predicting the physical part of ignition delay period in the combustion of diesel engines with swirl is developed. This model is based on a single droplet evaporation model. The governing equations, namely, equations of droplet motion, heat and mass transfer were solved simultaneously using a Runge-Kutta step by step method. The computation was executed u...

متن کامل

Effects of Direct Water Injection on DI Diesel Engine Combustion

The effects of in-cylinder water injection on a direct injection (DI) Diesel engine were studied using a computational fluid dynamics (CFD) program based on the Kiva-3v code. The spray model is validated against experimental bomb data with good agreement for vapor penetration as a function of time. It was found that liquid penetration increased approximately 35% with 23% of the fuel volume repl...

متن کامل

CFD Investigation into Diesel PCCI Combustion with Optimized Fuel Injection

A multi-pulse injection strategy for premixed charge compression ignition (PCCI) combustion was investigated in a four-valve, direct-injection diesel engine by a computational fluid dynamics (CFD) simulation using KIVA-3V code coupled with detailed chemistry. The effects of fuel splitting proportion, injection timing, spray angles, and injection velocity were examined. The mixing process and fo...

متن کامل

Combustion Characteristics of a Diesel-hydrogen Dual Fuel Engine

Among the alternative fuels, hydrogen shows great potential in the near future. In the present study, hydrogen utilization as diesel engine fuel was investigated. Hydrogen can not be used directly in a diesel engine due to its autoignition temperature higher than that of diesel fuel. One alternative method is to use hydrogen in enrichment or induction. To investigate the combustion characterist...

متن کامل

A dynamic PCCI combustion model for Diesel engine control design

Subject of this work is a dynamic simulation model for PCCI combustion that can be used in closed-loop control development. A detailed multi-zone chemistry model for the high-pressure part of the engine cycle is extended by a mean value model accounting for the gas exchange losses. The resulting model is capable of describing PCCI combustion with stationary exactness. It is at the same time ver...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Physics: Conference Series

سال: 2016

ISSN: 1742-6588,1742-6596

DOI: 10.1088/1742-6596/744/1/012103