Study on Mechanical Properties of Polyurethane Foam Concrete
نویسندگان
چکیده
Foamed concrete is a special type of and it can be used widely in construction reinforced structures. this study very helpful for understanding about foamed mechanical properties concrete. Lot researches are going on material finally we got It has lot advantages compared to conventional Fluidity Flowability good the foam low cost high Manufacturing Production poly urethane simple easy. because their density low-cost works. Weight also less other
منابع مشابه
Nonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولInfluence of Polyurethane Properties on Mechanical Performances of Magnetorheological Elastomers
Magnetorheological elastomers (MREs) are mainly composed of magnetizable particles and elastic polymer. The polymer matrix plays an important role in mechanical performances of MREs. In this study, the polyurethane (PU), which is synthesized by using toluene diisocyanate (TDI) and poly (propylene glycol) (PPG-220), is selected as a matrix because it has better degradation stability than natural...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملEffect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films
Polyurethane/zeolite 13X nanocomposite films were fabricated using solution casting method. The synthesized nanocomposite films were structurally characterized using SEM, TGA and tensile analysis. SEM images showed appropriate distribution of nanocrystalline zeolite particles within polyurethane matrix. Better thermal stability of nanocomposite films in comparison to neat polyurethane was shown...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Indian Journal of Structure Engineering (IJSE)
سال: 2021
ISSN: ['2582-922X']
DOI: https://doi.org/10.35940/ijse.b8005.051121