Study on High Temperature Properties of Fiber-Free SMA Mixture
نویسندگان
چکیده
The high temperature performance of asphalt mixture is an important factor to determine pavement life. Through rut test, dynamic modulus test and repeated load creep the high-temperature properties two kinds SMA mixtures were compared by different indexes, characteristics non-fiber evaluated. stability slope curve showed that had advantage in development rate with ordinary SMA. estimated road life flow number Fn based on rutting could bear nearly 80% more standard axle than normal 11%. When permanent deformation reaches failure stage, can loads. main curves moduli at reference temperatures are basically same, characterizing mechanical have little difference. Compared mixture, film thickness surface thinner, skeleton effect between coarse aggregates prominent, which reason for improvement mixture.
منابع مشابه
Analysis of High Temperature Stability and Water Stability of SMA Mixture using Orthogonal Experiments
The influence of three material factors, namely asphalt-aggregate ratio, fiber-aggregate ratio and mineral filler–aggregate ratio (filler–aggregate ratio) on Marshall indexes of the lignin fiber SMA mixture are investigated in this study. To achieve this goal, orthogonal experiment design and implementation of Marshall stability test, residential stability test and rutting test were used to ana...
متن کاملHIGH TEMPERATURE ELASTIC PROPERTIES OF REFRACTORY MATERIALS
Abstract: A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-85 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of ...
متن کاملEffect of firing temperature on the properties of inorganic high temperature phosphate adhesive
High-temperature adhesives are considered for high-temperature applications such as the refractory industry. In this research, inorganic high-temperature phosphate-based adhesive was prepared using alumina and micro silica as the main raw materials and monoaluminum phosphate as a binder. The effect of firing temperature on the properties of the adhesive including phases, microstructure, compres...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولThermomechanical Characterization of a TiPdNi High Temperature SMA under Tension
The focus of this paper is the study of tensile work characteristics and the transformation behavior of a High Temperature Shape Memory Alloy (HTSMA) by thermomechanical characterization at temperatures ranging from 200 to 500°C. In order to investigate the above issues, a nominal composition of Ti50Pd40Ni10 HTSMA was used. The alloy was fabricated using a vacuum arc melting technique. The melt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Materials Science and Applications
سال: 2023
ISSN: ['2327-2635', '2327-2643']
DOI: https://doi.org/10.11648/j.ijmsa.20231201.13