Study on Friction and Wear Properties of 23CrNi<sub>3</sub>Mo Carburized Steel under Water Lubrication
نویسندگان
چکیده
Abstract In this paper the friction and wear of 23CrNi 3 Mo carburized steel under water lubrication were studied. The properties sliding with stainless steel, GCr15, Al 2 O ZrO balls analyzed by tribometer, 3-D topography SEM. results show that compared other materials, carburizing have better tribological properties. Compared , depth is reduced 41% at load N 50% 10 N. range 2N-10N, rate lowest when rubbing it gradually decreases increases. Combined SEM Raman spectrum analysis, Oxide film was formed on surface during test steel. This oxide mainly composed Fe 4 which effectively reduces coefficient lubrication.
منابع مشابه
A STUDY ON WEAR RATES OF 100Cr6 STEEL RUNNING AGAINST SINTERED STEEL SURFACES UNDER DRY AND STARVED LUBRICATION
This paper investigates the tribological behavior of 100Cr6 steel pin running against sintered steel bearing material used in hermetic compressors. Tests were conducted under dry and starved lubrication sliding conditions in air at room temperature. Although porous structure acts as crack initiation sites thus limiting the wear resistance of sintered iron in dry sliding conditions under high co...
متن کاملA review of the influence of environmental humidity and water on friction, lubrication and wear
A review is given of the various ways in which humidity and liquid water can influence the friction and wear of metals, polymers, carbons and graphite, lamellar solid lubricants and ceramics. Compared with dry sliding, water usually reduces friction of materials to a limited extent, except for MoS2, but wear rates change depending on the materials concerned. Most of the fundamental mechanisms i...
متن کامل“ Effect of tempering temperature and applied load on various wear environment of carburized mild steel ”
This work presents the effect of various wear environments like 20% soil & 80% sand and 40% soil & 60% sand on as received and carburized mild steel sample at different load like 75N, 200N & 375N and at different tempering temperature like 200oC, 250oC & 300oC. The mild steel sample was carburized at 950oC. The heat treatment after carburization has been acknowledge that at some instant it impr...
متن کاملExperimental Investigation on Friction and Wear Properties of Different Steel Materials
Friction coefficient and wear rate of different steel materials are investigated and compared in this study. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 314 (SS 314), stainless steel 202 (SS 202) and mild steel slide against stainless steel 314 (SS 314) pin. Experiments are cond...
متن کاملFriction and Wear Behaviors of Gear Steel under Coupling of Rolling and Sliding
In this paper, the gear material 20CrMnTi was selected as the research object. Friction and wear behavior was performed on the M2000 friction and abrasion tester. The friction and wear mechanisms of 20CrMnTi steel were discussed under coupling of rolling and sliding. The results show that damage of steel-steel couples under coupling of rolling and sliding is caused by the interaction of mechani...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2022
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2338/1/012027