Study on fracture mode of spot weld joint using continuum damage mechanics model
نویسندگان
چکیده
منابع مشابه
Progressive Damage Analysis of Laminated Composites using Continuum Damage Mechanics
In this paper, progressive damage and global failure of composite laminates under quasi-static, monotonic loading are investigated using 3D continuum damage mechanics. For this purpose, a finite element program has been developed using an eight-node 2D layered element including layer-wise plate theory. Damage analysis of a single orthotropic layer under various uniform in-plane and transverse l...
متن کاملDamage Assessment using an Inverse Fracture Mechanics approach
This paper studies the application of an inverse methodology for problem solving in fracture mechanics using the finite element analysis. The method was applied to both detection of subsurface cracks and the study of propagating cracks. The procedure for detection of subsurface cracks uses a first order optimization analysis coupled with a penalty function to solve for the unknown geometric par...
متن کاملFracture mechanics-based life prediction of a riveted lap joint
In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...
متن کاملSpringback Modeling in L-bending Process Using Continuum Damage Mechanics Concept
Springback is one of the most common and important issues in metal forming area. Due to the fact that springback depends on a variety of parameters, it is hard to predict. Hence, in this paper, the effect of continuum damage mechanics (CDM) on springback was investigated based on the Lemaitre isotropic unified damage law. Swift’s hardening law was employed to describe isotropic hardening behavi...
متن کاملDamage and Fracture Mechanics
Interfaces between two different mixes or strengths of concrete appear in large concrete structures involving mass concreting such as dams, nuclear containment vessels, cooling towers etc., since joints between successive lifts are inevitable. These joints and interfaces are potential sites for crack formation, leading to weakening of mechanical strength and subsequent failure. Research involvi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2017
ISSN: 0288-4771
DOI: 10.2207/qjjws.35.28s