Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating
نویسندگان
چکیده
منابع مشابه
Characterizations of nano-crystalline diamond coating cutting tools
Diamond coatings made by processes such as chemical vapor deposition (CVD) have been increasingly explored for cutting tools applications, in particular, for machining lightweight high-strength materials. However, most literature to date reported that the wear resistance of CVD diamond tools is still distant to the polycrystalline diamond (PCD) counterparts. Recently, a microwave plasma-assiste...
متن کاملLaser Micro-Raman Spectroscopy of CVD Nanocrystalline Diamond Thin Film
Laser micro-Raman spectroscopy is an ideal tool for assessment and characterization of various types of carbon-based materials. Due to its special optical properties (CrN) coated stainless steel substrates. NCD films have been investigated by laser micro-Raman spectroscopy. The fingerprint of diamond based materials is in the spectral region of 1000-1600 cm-1 in the first order of Raman scatter...
متن کاملFemtosecond Laser Processing of Nitinol
The effects of femtosecond laser machining on surface characteristics and subsurface microstructure of a Nitinol alloy were studied. The femtosecond laser machining produced an average surface roughness of 0.2 μm. A re-deposited layer of 7 μm and a hardened layer of 70 μm were also resulted from the machining.
متن کاملProcessing microstructure on film by femtosecond laser
Selective laser patterning of thin films in a multilayer film is an emerging technology for fabrication of MEMS devices. A 775 nm Ti:sapphire laser (130 fs, 1 kHZ) was used to irradiate the thin film stacks with variations in process parameters such as feed rate and numerical aperture of objective lens. Femtosecond laser patterning of Au/Cr films which have the same thickness of about 1000 nm a...
متن کاملPretreatment Effect on the Properties of Electroless Nano - Crystalline Nickel Phosphorous Coating
the influence of mechanical polishing pre-treatments on steel substrates is investigated in terms of microstructure, deposition rate, adhesion, mechanical and corrosion properties of electroless Ni-P nanocoating with 9-10% wt. of P content. XRD analysis of Ni-P coatings demonstrated the nanocrystalline structure of coating with the grain size of 39 nm. Results showed that pretreatment of substr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2019
ISSN: 2076-3417
DOI: 10.3390/app9204273