STUDY ON FAILURE MECHANISM OF RUBBER VULCANIZATES (XI) FATIGUE PROCESS (PART III), FATIGUE LIFE OF VULCANIZATES FILLED WITH RUBBER POWDER
نویسندگان
چکیده
منابع مشابه
Multiaxial stress effects on fatigue behavior of filled natural rubber
This work explores multiaxial stress effects on fatigue crack nucleation and growth in filled natural rubber based on experiments using short thin-walled cylindrical specimens subjected to axial and twist displacements. Cyclic stress–strain response exhibits significant initial softening relative to the monotonic response, followed by a more gradual additional softening. Irreversible breakage o...
متن کاملEffect of Rubber Nanoparticle Agglomeration on Properties of Thermoplastic Vulcanizates during Dynamic Vulcanization
We previously reported that the dispersed rubber microparticles in ethylene-propylenediene monomer (EPDM)/polypropylene (PP) thermoplastic vulcanizates (TPVs) are actually agglomerates of rubber nanoparticles. In this study, based on this new understanding of the microstructure of TPV, we further revealed the microstructure-properties relationship of EPDM/PP TPV during dynamic vulcanization, es...
متن کاملInfluence of Engage® copolymer type on the properties of Engage®/silicone rubber-based thermoplastic dynamic vulcanizates
Thermoplastic vulcanizates (TPVs) are a special class of thermoplastic elastomers, which are produced by simultaneously mixing and crosslinking a rubber with a thermoplastic polymer at an elevated temperature. Peroxide-cured TPVs based on blends of silicone rubber and thermoplastic Engage of two different types, mainly ethylene-octene and ethylenebutene copolymers at different blend ratios have...
متن کاملInfluence of Electron Beam Irradiation and Step-Crosslinking Process on Solvent Penetration and Thermal Properties of Natural Rubber Vulcanizates
The influence of both electron beam irradiation and step-crosslinking process on the high abrasion furnace (HAF) carbon black loaded natural rubber (NR) vulcanizates are reported. With irradiation, a higher crosslinking density, ν, thermal conductivity, λ, glass transition temperature, Tg, and decreased specific heat capacity, Cp, have been observed for the irradiated materials as compared with...
متن کاملCarbon-silica Dual Phase Filler, a New Generation Reinforcing Agent for Rubber. Part Vi. Time-temperature Superposition of Dynamic Properties of Carbon-silica Dual Phase Filler-filled Vulcanizates
Dynamic properties such as shear modulus, loss modulus, and loss factor were obtained at low strain amplitude over a wide range of frequency and temperature on vulcanizates filled with carbon black, silica, and carbon-silica dual phase filler. The data were shifted along the frequency scale. It was found that instead of a single smooth master curve, a pseudo-master curve with feather-like struc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON GOMU KYOKAISHI
سال: 1979
ISSN: 0029-022X,1884-0442
DOI: 10.2324/gomu.52.6_391