Study on Electrolyte Jet Machining of Cemented Carbide
نویسندگان
چکیده
منابع مشابه
Influence of electrical discharge machining on sliding friction and wear of WC–Ni cemented carbide
Tribological characteristics of fine-grained WC–8 wt%Ni with different surface finishing conditions corresponding to sequential wire electrical discharge machining (wire-EDM) or grinding were investigated by performing dry reciprocating sliding experiments on TE77 pin-on-plate equipment with WC–6 wt%Co as mating material. Surface finishes and wear surfaces were characterized using surface topog...
متن کاملDevelopment of Creep-Resistant Tungsten Carbide Copper Cemented Carbide
Fine-grained tungsten carbide copper (WC-Cu) cemented carbide was sintered via spark plasma sintering at 1773K using a fine WC powder with a mean particle size of 0.11 mm. The mechanical properties were compared with tungsten carbide cobalt (WC-Co) cemented carbide and a binderless WC-sintered material. The Vickers hardness and fracture toughness obtained by the indentation fracture method for ...
متن کاملLiterature Review on Abrasive Jet Machining
A machining operation is basically termed a material removal process, where material is removed in the form of chips. In a machining operation, the output parameter is achieved by controlling various input parameters. This paper discusses the effects of various input parameters in abrasive Jet machining (AJM) on the output parameter(Metal Removal Rate [MRR).This paper presents an extensive revi...
متن کاملControlling the Adhesion of Superhydrophobic Surfaces Using Electrolyte Jet Machining Techniques.
Patterns with controllable adhesion on superhydrophobic areas have various biomedical and chemical applications. Electrolyte jet machining technique (EJM), an electrochemical machining method, was firstly exploited in constructing dimples with various profiles on the superhydrophobic Al alloy surface using different processing parameters. Sliding angles of water droplets on those dimples firstl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Electrical Machining
سال: 2013
ISSN: 1341-7908,2188-5117
DOI: 10.2526/ijem.18.23