Study on Electrofusion Joining Peocess for Gas Polyethylene Pipes Using Simulation Technology

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrasonic phased array inspection of electrofusion joints in polyethylene pipes

The use of plastic as a pipe material for the transport of gas and water has increased over the last few years, attributed to the significant advantages of this material such as corrosion resistance, strengthto-weight ratio, lightness, flexibility and cost. Consequently, these pipes have a long predicted service life. One of the pipes’ joining processes is electrofusion welding. As for all kind...

متن کامل

a study on thermodynamic models for simulation of 1,3 butadiene purification columns

attempts have been made to study the thermodynamic behavior of 1,3 butadiene purification columns with the aim of retrofitting those columns to more energy efficient separation schemes. 1,3 butadiene is purified in two columns in series through being separated from methyl acetylene and 1,2 butadiene in the first and second column respectively. comparisons have been made among different therm...

Polyethylene/Clay/Graphite Nanocomposites as Potential Materials for Preparation of Reinforced Conductive Natural Gas Transfer Pipes

A series of high-density polyethylene/Cloisite 20A/graphite nanocomposites were prepared via melt blending for the production of polymeric pipes for natural gas transfer. The microstructural, mechanical, thermal, electrical and barrier properties of prepared nanocomposites were investigated. An intercalated morphology was observed for prepared nanocomposites. Improved mechanical properties ...

متن کامل

Mobile NMR for Analysis of Polyethylene Pipes

NMR relaxometry is a suitable tool to determine the morphology of semi-crystalline polymers by its ability to discriminate between rigid, mostly crystalline and soft, usually amorphous material. The NMR-MOUSE◦R (nuclear magnetic resonance mobile universal surface explorer) was explored in this work to supply morphological data of poly(ethylene) pipes nondestructively. PE-100 pipes were investig...

متن کامل

Slow Crack Growth-Notches-Pressurized Polyethylene Pipes

A general method for predicting the life time of a polyethylene structure that fails by slow crack growth was applied to the case of externally notched pressurized pipes. An analysis of experimental data indicated that the residual stress must be taken into account. The critical notch depths associated with a given life time were calculated as a function of pipe size, PENT value of the resin an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Seikei-Kakou

سال: 1996

ISSN: 1883-7417,0915-4027

DOI: 10.4325/seikeikakou.8.80