Study on Crack Growth Behavior in Impact Fatigue : 2nd Report, Crack Closure Behavior under Simple Impact Fatigue Loading Condition
نویسندگان
چکیده
منابع مشابه
Analyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior
A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...
متن کاملEffect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading
In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...
متن کاملOn Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملFatigue of Yttria-Stabilized Zirconia: II, Crack Propagation, Fatigue Striations, and Short-Crack Behavior
Fatigue crack propagation in 3Y-TZP was investigated using controlled surface flaws. A unique growth law strongly dependent on the maximum stress intensity factor and quadratically dependent on the amplitude of the range of stress intensity factor was established. This growth law was found to apply for both surface flaws and internal flaws and could be used to predict fatigue lifetime. The pres...
متن کاملTransient Fatigue-crack Growth Behavior following Variable-amplitude Loading in a Monolithic Silicon Nitride Ceramic
ÐTransient cyclic fatigue-crack growth behavior following variable-amplitude loading sequences has been investigated in a hot-pressed, monolithic Si3N4 ceramic (NTK EC-141), for which fracture toughness (resistance-curve) and cyclic fatigue properties are well characterized. Following rapid changes in the applied stress-intensity range, DK, during both low-high and high-low block-loading sequen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1983
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.49.1036