Study on brass electrodeposition by pulse electrolysis from cyanide plating bath.
نویسندگان
چکیده
منابع مشابه
Mirror-Bright Silver Plating from a Cyanide-Free Bath
ilver has good electric conductivity and solderability and possesses S excellent electric characteristics as a contact and is thus widely used for plating electronic industrial parts. A cyanide plating bath is most often used, but the cyanide compounds have strong toxicity and a large amount of the cost is rxpkd for securing safe working conditions and waste treatment. Because of this, many cya...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملFormation of Au Microbump Arrays for Flip-Chip Bonding Using Electroless Au Deposition from a Non-Cyanide Plating Bath
The formation of Au microbump arrays for flip-chip bonding was investigated using an electroless Au plating bath. Generally, electroless Au deposition gives a low deposition rate, preventing the fabrication of Au bumps with heights of more than 5 μm. To overcome this problem, we developed a new electroless Au deposition process that employs a non-cyanide bath. This process delivers a high depos...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولPreparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method
Gd2O3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. First, Gd(OH)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (PC) mode. The deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. The electrodeposited precursor was the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1988
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.39.203