Study on analytical prediction of cutting tool life. (5th report). Analytical prediction of flank wear.
نویسندگان
چکیده
منابع مشابه
Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولCharacterizations of cutting tool flank wear-land contact
Metal deposition at the tool flank wear-land during machining is a common phenomenon, especially in machining aluminum alloys and annealed teels. The cause of metal deposit has not been studied and the characteristics of the wear-land and deposit contact are not completely known. In his study, a turning test was conducted using tungsten carbide (WC) tools with pre-generated wear-land to machine...
متن کاملAnalytical Performance Prediction on MulticomputersMark
Multicomputers have the potential to deliver Gi-gaaop performance on many scientiic applications. Initial implementations of parallel programs on these machines, however, are often ineecient and require signiicant optimization before they can harness the potential power of the machine. Performance prediction tools can provide valuable information on which optimizations will result in increased ...
متن کاملPredictive Analytical and Thermal Modeling of Orthogonal Cutting Process—Part II: Effect of Tool Flank Wear on Tool Forces, Stresses, and Temperature Distributions
In this paper, predictive modeling of cutting and ploughing forces, stress distributions on tool faces, and temperature distributions in the presence of tool flank wear are presented. The analytical and thermal modeling of orthogonal cutting that is introduced in Part I of the paper is extended for worn tool case in order to study the effect of flank wear on the predictions. Work material const...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1988
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.54.346