STUDY ON A DETERIORATION AND DETERIORATION INDICATOR OF CONCRETE UNDER MARINE ENVIRONMENTS
نویسندگان
چکیده
منابع مشابه
Deterioration of Concrete in Ambient Marine Environment (RESEARCH NOTE)
Structural concrete exposed to marine environment deserves special attention as the diffused sea salts chemically react with harden cement matrix and forms various expansive/leachable compounds leading to loss of material, strength, cracking, spalling etc. This study cover the effect of sea water on the specimens cast from two grades of concrete exposed to simulated marine environment over a ye...
متن کاملEffects of Deicers on Concrete Deterioration
Concrete specimens were exposed to weekly cycles of wetting and drying in distilled water and in solutions of sodium chloride, calcium chloride, magnesium chloride, and calcium magnesium acetate with either a 6.04 molal ion concentration, equivalent in ion concentration to a 15% solution of NaCl, or a 1.06 molal ion concentration, equivalent in ion concentration to a 3% solution of NaCl, for pe...
متن کاملJoint Deterioration in Concrete Pavements
Concrete pavements located in cold climates have been experiencing premature joint deterioration. Entrapment of moisture in the joints saturates the surrounding concrete, rendering it susceptible to freeze–thaw damage. To identify and to isolate the variables that might be causing this localized deterioration, concrete cores were obtained from deteriorated and non-deteriorated sections of US 35...
متن کاملMicrobiologically induced deterioration of concrete - A Review
Microbiologically induced deterioration (MID) causes corrosion of concrete by producing acids (including organic and inorganic acids) that degrade concrete components and thus compromise the integrity of sewer pipelines and other structures, creating significant problems worldwide. Understanding of the fundamental corrosion process and the causal agents will help us develop an appropriate strat...
متن کاملSimultaneous Optimization of Production and Quality in a Deterioration Process
Achieving optimal production cycle time for improving manufacturing processes is one of the common problems in production planning. During recent years, different approaches have been developed for solving this problem, but most of them assume that mean quality characteristic is constant over production run length and sets it on customer’s target value. However, the process mean may drift from ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshuu E
سال: 2010
ISSN: 1880-6066
DOI: 10.2208/jsceje.66.21