Study of tool Penetration Behavior in Dissimilar Al5083 /C10100 Friction Stir Spot Welds

Texture development in friction stir welds

The shear textures that develop in friction stir welds are reviewed and discussed. In all the materials examined, including face centred cubic (fcc), body centred cubic (bcc) and hexagonal close-packed (hcp) materials, friction stir welding produces a predominant shear texture with the close-packed directions aligned with the shear direction (SD) and the close-packed plane normal perpendicular ...

Friction Stir Processing of 304L Arc Welds

Ultrasonic evaluation of friction stir welds and dissimilar intermixing using synthetic aperture focusing technique

Friction stir welding (FSW) is a recently developed solid-state joining process that uses a specially shaped rotating tool to produce lap or butt joints. At the National Research Council, an inter-institute collaboration was started in 2007 with the goal of exploiting the NDE expertise and applying it for the characterization of friction stir welds for various industrial applications. In partic...

Microstructure and mechanical properties of friction spot welds of dissimilar AA 5754

In the present study, friction spot welding or refill friction stir spot welding was performed to consolidate dissimilar AA5754 Al and AZ31 Mg alloys. The intermetallic compounds of Al12Mg17 and Al3Mg2 were primarily found in the weld, distributed at the interface between the base materials and in the Al top sheet. The distribution of the intermetallic compounds and the interfacial area between...

Influence of Tool Shoulder Geometry on Properties of Friction Stir Welds in Thin Copper Sheets