Study of Surface Roughness on Friction in Rolling/Sliding Contacts: Ball-on-Disc Versus Twin-Disc
نویسندگان
چکیده
منابع مشابه
Effect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملFriction in metal-on-metal total disc arthroplasty: effect of ball radius.
Total disc arthroplasty (TDA) can be used to replace a degenerated intervertebral disc in the spine. There are different designs of prosthetic discs, but one of the most common is a ball-and-socket combination. Contact between the bearing surfaces can result in high frictional torque, which can then result in wear and implant loosening. This study was designed to determine the effects of ball r...
متن کاملPin-on-disc study of the effects of railway friction modifiers on airborne wear particles from wheel–rail contacts
Knowledge of wheel–rail interaction is crucial to wheel and rail maintenance. In this interaction, some of the worn-off material is transformed into airborne particles. Although such wear is well understood, few studies treat the particles generated. We investigated friction modifiers' effects on airborne particles characteristics generated in wheel-rail contacts in laboratory conditions. Pin-o...
متن کاملCervical Disc Arthroplasty versus Disc Fusion: A Finite Element Study
INTRODUCTION: Disc degeneration is a natural process and is widely prevalent. The level of disc degeneration and the type of treatment varies from person to person. Fusion is a commonly chosen treatment option. However clinical and biomechanical studies have shown that spinal levels adjacent to a fusion experience increased motion and higher stress which may lead to adjacent-segment disease [1]...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Letters
سال: 2020
ISSN: 1023-8883,1573-2711
DOI: 10.1007/s11249-020-01310-z