Study of Nano-Mechanical, Electrochemical and Raman Spectroscopic Behavior of Al6061-SiC-Graphite Hybrid Surface Composite Fabricated through Friction Stir Processing

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Al/Graphite/Al2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite

Friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized Al2O3 and micro sized graphite particles. A mixture of Al2O3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. Packed groove was subjected to friction stir processing in order to im...

متن کامل

fabrication of al/graphite/al2o3 surface hybrid nano composite by friction stir processing and investigating the wear and microstructural properties of the composite

friction stir processing was applied for fabricating an aluminum alloy based hybrid nano composite reinforced with nano sized al2o3 and micro sized graphite particles. a mixture of al2o3 and graphite particles was packed into a groove with 1 mm width and 4.5 mm depth, which had been cut in 5083 aluminum plate of 10 mm thick. packed groove was subjected to friction stir processing in order to im...

متن کامل

investigation of mechanical property and microstructure of nanocomposite az31/sic fabricated by friction stir process

the friction stir process (fsp) is a solid state process, which has been used to insert reinforcing particles into the structure of a material to create a composite with improved properties. magnesium is a light structural metal that is increasingly used in the aerospace and automobile industries. in this research, sic nanoparticles were added to az31 alloy using fsp in two overlaps of 100% and...

متن کامل

The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing

In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...

متن کامل

Effect of texture evolution on mechanical and damping properties of SiC/ZnAl2O4/Al composite through friction stir processing

In this investigation, special consideration was given to observe the influence of the acquired ultra-fine-grain (UFG) structure through friction stir processing (FSP) on mechanical and damping properties. As the mechanical behaviour of the composites are intensely related to their microstructure. For deeply understanding the possible mechanism and detailed microstructural observations at a lon...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Composites Science

سال: 2018

ISSN: 2504-477X

DOI: 10.3390/jcs2020032