Study of MWCNT Dispersion Effect in TiO2-MWCNT Composites for Gas-Phase Propene Photooxidation
نویسندگان
چکیده
We have performed the synthesis of TiO2-MWCNT composites focusing on distribution photoactive phase carbon active sites existing in MWCNTs, and its effect properties for abatement propene. used different approaches dispersion MWCNTs during synthesis; 1) an ultrasound bath 5 minutes, 2) 60 3) probe min. observed that incorporation TiO2 improves catalytic activity photooxidation propene, but best results are obtained treatment. A good MWCNT increase surface area or oxygen functionalities key factors to achieve improved photocatalytic total propene oxidation, thus benefitting from synergy between MWCNT.
منابع مشابه
Optimization of MWCNT – Metal Matrix Composites feedstocks
Micro powder injection moulding-μPIM is a powder injection moulding-PIM variant for microparts/devices. This study is about the optimization and respective production of nanocomposites feedstocks suitable to μPIM process. The optimization of MWCNT content in metal matrix composites-MMC feedstock were performed using torque rheometry until achieve homogeneous feedstocks with suitable flowability...
متن کاملAnalysis of MWCNT/epoxy composites at microwave frequency: reproducibility investigation
A wide-band microwave characterization of nanocomposites based on commercial multiwalled carbon nanotubes (MWCNTs) and epoxy resin is presented. The sample preparation method is discussed in detail. Field emission scanning electron microscopy is used for morphological sample analysis of nanocomposites and MWCNTs. The complex permittivity is measured in a wide frequency band (3 to 18 GHz) using ...
متن کاملAnalysis of Microwave Absorbing Properties of Epoxy MWCNT Composites
In the ongoing search for new materials for microwave absorption applications, Carbon Nanotubes deserve a special consideration due to their outstanding properties. In this paper, microwave absorbing properties of epoxy resin based composites containing commercial Multi Walled Carbon Nanotubes used as fillers have been analyzed. The complex permittivity of the composites was measured in a wide ...
متن کاملEffect on Hardness and Densification of Mwcnt Reinforced Aa2219 Composites Sintered in Different Methods
The current research compares the processing influence of Spark plasma sintering (SPS) over conventional sintering on aluminium alloy AA2219 MWCNT composites. Also investigations on the effect of MWCNT content on the properties of composite are presented and discussed. Though unreinforced matrix processed under SPS showed 24.68% improvement in hardness over conventional, the same could not be r...
متن کاملA Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites
One of the most important applications of carbon nanotubes (CNTs) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. In this study, Al-TiO2-multi walled carbon nanotubes (MWCNTs) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. Mechanical alloying is used to mix powders of aluminium, TiO2 and MWCNTs. TiO2 with the amo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Bulletin
سال: 2021
ISSN: ['1873-4227', '0025-5408']
DOI: https://doi.org/10.1016/j.materresbull.2020.111089