Study of Lubricating Oil Degradation of CI Engine Fueled with Diesel-Ethanol Blend

An Experimental Study on the Solubility of a Diesel-Ethanol Blend and on the Performance of a Diesel Engine Fueled with Diesel- Biodiesel - Ethanol Blends

The phase stability of DE and DBE blends at different component concentrations, as well as the effects of using DBE blends including ethanol of various proportions on a CI engine performance are experimentally investigated. The engine was operated with DBE blends having 5, 10, 15 and 20% ethanol with fixed 10% biodiesel on a volume basis, to solve the phase separation problem, as well as on die...

Characteristics of fish oil biodiesel with the impact of diesel fuel addition on a CI engine

The present study focuses on the optimization in the use of non-petroleum fuel derived from waste fish oil fuels, as a replacement for petroleum diesel fuel for compression ignition engine. The study comprises of comparison between results of fish oil biodiesel-diesel blends on a compression ignition engine. Fuel properties such as viscosity, density, heat value of fuel, cetane number and a fla...

Performance and Emission Characteristics of Diesel Engine Fueled with Ethanol-Diesel Blends in Different Altitude Regions

In order to investigate the effects ethanol-diesel blends and altitude on the performance and emissions of diesel engine, the comparative experiments were carried out on the bench of turbo-charged diesel engine fueled with pure diesel (as prototype) and ethanol-diesel blends (E10, E15, E20 and E30) under different atmospheric pressures (81 kPa, 90 kPa and 100 kPa). The experimental results indi...

Utilization of Biodiesel-Diesel-Ethanol Blends in CI Engine

Performance evaluation of a low heat rejection diesel engine with carbureted ethanol and jatropha oil

Experiments were conducted to evaluate the performance of a low heat rejection (LHR) diesel engine. Performance parameters and emission levels were determined at various magnitudes of brake mean effective pressure. Combustion characteristics of the engine were measured with TDC (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package at peak load...