Study of Liquefaction Potential Using Cone Penetration Test at Balaroa Village Palu
نویسندگان
چکیده
Abstract Central Sulawesi Province is one of the areas in Indonesia that prone to large earthquakes. Balaroa, Petobo, and Sibalaya were among most fatalities damaged facilities infrastructure due earthquake on September 28th 2018. Around Balaroa Village, besides huge damages Perumnas Housing, area around housing was also affected, for example Jamur, Kelor, Labu streets, many houses buildings damaged. This research aims assess potential ground this liquefy. Cone Penetration Test (CPT) conducted at 3 points Kelor street, then results used calculate Factor Safety (FS) Liquefaction Potential Index (LPI). The indicated FS values each point sites obtained average have an value less than 1 which indicates vulnerable liquefaction. analysis liquefaction index (LPI) show a range varied from low high.
منابع مشابه
Using Miniature Cone Penetration Test (Mini-CPT) to determine engineering properties of sandy soils
In-situ testing techniques have proven to be successful in improving the speed and reliability of geotechnical investigations. One of the most common in-situ methods in engineering geology and site investigation is Cone Penetration Test (CPT), which is mainly used for characterization of soils, as it is a robust, simple, fast, reliable and economic test that can provide continuous soundings of ...
متن کاملA Method for Predicting Pile Capacity Using Cone Penetration Test Data
The massive construction in poor lands has encouraged engineers to use deep foundations in order to transfer superstructure loads to the subsoil. Since soil excavation, sampling, and laboratory testing as a part of site investigation are relatively difficult, in-situ tests such as cone penetration test (CPT) as a very informative test may be recommended. The CPT has been widely used in engineer...
متن کاملEstimating of geotechnical properties of clay soil with dynamic cone penetration (DCP) test
Dynamic cone penetration (DCP) test is used more in pavement design and construction, and less for subsurface geotechnical investigation and clay core dam. In the present article, evaluating geotechnical parameters of Sanandaj’s clay in the western region of Iran using the DCP test was taken into account. Accordingly, 6 trial pits with maximum depths of 15 m were excavated manually in various s...
متن کاملusing miniature cone penetration test (mini-cpt) to determine engineering properties of sandy soils
in-situ testing techniques have proven to be successful in improving the speed and reliability of geotechnical investigations. one of the most common in-situ methods in engineering geology and site investigation is cone penetration test (cpt), which is mainly used for characterization of soils, as it is a robust, simple, fast, reliable and economic test that can provide continuous soundings of ...
متن کاملSubsurface Exploration Using the Standard Penetration Test and the Cone Penetrometer Test
The Standard Penetration Test (SPT) and Cone Penetrometer Test (CPT) have become industry standards for subsurface geotechnical investigations using small diameter (<8-in. [20-cm]) borings and soundings. Both procedures have evolved over a period of 100 and 70 years, respectively, and have been adopted as ASTM standards. Each procedure has certain advantages over the other, but both can elicit ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP conference series
سال: 2023
ISSN: ['1757-899X', '1757-8981']
DOI: https://doi.org/10.1088/1755-1315/1157/1/012019