Study of friction stir spot welding on AA6063 aluminium alloy used in the ship building industry
نویسندگان
چکیده
منابع مشابه
Study of Mechanical Properties Change During Friction Stir Spot Welding of Aluminium Alloys
The Friction Stir Welding process is now 20 years old and the interest in it and its potential continues to increase dramatically. FSW can be applied to a multitude of products with varying material types and thicknesses. However, a continuous weld is not always required to meet the product performance requirements. Thus, one can consider some form of intermittent weld, such as Friction Stir Sp...
متن کاملFeasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...
متن کاملAnalysis and Comparison of Friction Stir Welding and Laser Assisted Friction Stir Welding of Aluminum Alloy
Friction Stir Welding (FSW) is a solid-state joining process; i.e., no melting occurs. The welding process is promoted by the rotation and translation of an axis-symmetric non-consumable tool along the weld centerline. Thus, the FSW process is performed at much lower temperatures than conventional fusion welding, nevertheless it has some disadvantages. Laser Assisted Friction Stir Welding (LAFS...
متن کاملEffect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions
The basic aim of present study is to examine the effect of main friction stir welding (FSW) parameters on the quality of AA 6063 plate welds. Welding of AA6063 was carried out by a vertical milling machine, using different tools with a stationary shoulder and during the welding no external heating system was used. Different welding parameters studied were the tool rotational speed which varied ...
متن کاملStudying the Possibility to Weld AA1100 Aluminum Alloy by Friction Stir Spot Welding
Abstract—Friction stir welding is a modern and an environmentally friendly solid state joining process used to joint relatively lighter family of materials. Recently, friction stir spot welding has been used instead of resistance spot welding which has received considerable attention from the automotive industry. It is environmentally friendly process that eliminated heat and pollution. In this...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Matéria (Rio de Janeiro)
سال: 2018
ISSN: 1517-7076
DOI: 10.1590/s1517-707620180002.0348