Study of barium bismuth titanate prepared by mechanochemical synthesis
نویسندگان
چکیده
منابع مشابه
Synthesis and characterization of Barium Strontium Titanate (BST) micro/nanostructures prepared by improved methods
Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...
متن کاملSynthesis and characterization of Barium Strontium Titanate (BST) micro/nanostructures prepared by improved methods
Nowadays various methods are presented for synthesis of barium strontium titanate (BST) nanopowders with different morphology and properties. Each of these (BST)s has got individual characterization that makes it suitable for a special application. Every method has a special quality, causes it to have preference over the other methods. Low processing temperature is a desired point which most of...
متن کاملsynthesis and characterization of barium strontium titanate (bst) micro/nanostructures prepared by improved methods
nowadays various methods are presented for synthesis of barium strontium titanate (bst) nanopowders with different morphology and properties. each of these (bst)s has got individual characterization that makes it suitable for a special application. every method has a special quality, causes it to have preference over the other methods. low processing temperature is a desired point which most of...
متن کاملMorphology-controlled synthesis of barium titanate nanostructures.
This study reports the synthesis of morphology-controlled BaTiO(3) nanostructures such as spherical, cube-shaped and rod-shaped BaTiO(3) using a molten-salt synthesis method. This method synthesized products from a reaction of BaO/BaCO(3) and TiO(2) with a eutectic mixture of NaCl-KCl flux at 700 degrees C for 1 h. The experiment used powder X-ray diffraction, field emission scanning electron m...
متن کاملSynthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2009
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos0903329l