Study Effect Treatment Thermal for Cermet Composite Prepared by Flame Thermal Spray Method.
نویسندگان
چکیده
منابع مشابه
Influence of Vacuum Heat Treatment on the Residual Stress of Thermal Spray Cermet Coatings
and light microscopy were used to identify the changes after the heat-treatment. Microhardness and indentation modulus values were also investigated to analyse the changes in the mechanical properties after the heat-treatment. Results of this investigation indicated that the residual stress gradient within the coating material decreases after the heat-treatment, and the stress field in the subs...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولThermal Spray Coatings
THERMAL SPRAY is a generic term for a group of processes in which metallic, ceramic, cermet, and some polymeric materials in the form of powder, wire, or rod are fed to a torch or gun with which they are heated to near or somewhat above their melting point. The resulting molten or nearly molten droplets of material are accelerated in a gas stream and projected against the surface to be coated (...
متن کاملSynthesis and Characterization of Co-Mn Nanocatalyst Prepared by Thermal Decomposition for Fischer-Tropsch Reaction
Nano-structure of Co–Mn spinel oxide was prepared by thermal decomposition method using [Co(NH3)4CO3]MnO4 as the precursor. The properties of the synthesized material were characterized by X-Ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), Transmission Electron Microscopy (TEM), surface area measurements, Energy-Dispersive X-ray (EDX) spectroscopy analys...
متن کاملEffect of Thickness on the Structural Properties of Tellurium Film Prepared by Thermal Evaporation
In this research, tellurium (Te) film with thicknesses of 100-250 nm were deposited on ceramic substrates by thermal evaporation at 373 K. The thickness of the film was determined by Rutherford backscattering spectroscopy. The influence of the thickness on the structural, morphological and molecular bonds was characterized using XRD, scanning electron microscope, and Raman spectroscopy. The XRD...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kirkuk University Journal-Scientific Studies
سال: 2021
ISSN: 2616-6801
DOI: 10.32894/kujss.2021.167517