Studies on Vorious Descaling Methods for Pretreatment of Hot-dip Galvanizing

Exploring Carbide-Free Bainitic Structures for Hot Dip Galvanizing Products

Some Applications of Neural Networks for Condition Monitoring in Industrial Systems for Hot Dip Zinc Galvanizing

The paper describes the abilities of some particular neural network structures (NNS) to provide condition monitoring in a real industrial system, designated for hot dip zinc galvanizing. Condition assessment of a molten zinc bath furnace, and more specifically analysis and prediction of the technical condition in galvanizing kettle walls are also developed in this paper.

REACTION KINETICS OF THE FORMATION OF INTERMETALLIC Fe – Zn DURING HOT - DIP GALVANIZING OF STEEL

P. Pokorny, J. Kolisko, L. Balik – Czech Technical University – Klokner Institute, Prague, Czech Republic P. Novak – Institute of Chemical Technology, Prague, Czech Republic This review article mainly describes the composition of intermetallic Fe Zn, i.e. zeta (ζ), delta (δ1k + δ1p), gamma1 (Γ1) and gamma (Γ) on galvanized steel during low temperature galvanization (t ~ 450 °C). It gives detail...

Effect of Mg on the Microstructure and Corrosion Resistance of the Continuously Hot-Dip Galvanizing Zn-Mg Coating

The microstructure of continuously hot-dip galvanizing Zn-Mg coating was investigated in order to obtain the mechanism of the effects of Mg on the corrosion resistance. In this paper, the vertical section of the Zn-0.20 wt % Al-Mg ternary phase diagram near the Al-low corner was calculated. The results indicates that the phase composition of the Zn-0.20 wt % Al-Mg ternary phase diagram near the...

Determination of Surface Topography and Composition of Cr-Free Pretreatment Layers on Hot Dip Galvanized Steel

Topography and composition of Cr-free, titanium-based pretreatment layers on hot dip galvanized steel were studied with scanning electron microscopy, atomic force microscopy, time of flight secondary ion mass spectrometry and Auger electron spectroscopy. A layer within the target coating weight range (4-10 mg Ti/m) for industrial coil coating processes contained a micro-structure with hillocks ...