Studies on the Torsional Creep Strength of 5% Cr Hot Work Die Steel and Mo-High Speed Steel
نویسندگان
چکیده
منابع مشابه
The development of creep damage constitutive equations for low Cr-Mo alloy steel and its weldment at low stress
The ultimate objective of this research project is to develop creep damage constitutive equations for low Cr-Mo alloy and its weldment under low stress (0.2-0.4 yield stress, ��). This paper summarizes a critical analysis on the cavity nucleation and growth and the deformation mechanisms and creep damage evolution characteristics at low stress with temperature ranging from 450 °C to 650 °C, in ...
متن کاملLaser Grooving of Surface Cracks on Hot Work Tool Steel
Repair welding (RW) with wire cladding is a common procedure to extend the in-service life of heavily loaded tool parts for die and mould industries 1-5 . The main advantages of repair welding are short downtime and cost efficiency compared to production of new tool part. Repair welding in general lowers the tool cost in the final part and enables higher added value to the die casting and injec...
متن کاملThe Influence of Hematite on High Speed Continuous Casting of Steel Lubricating Powders: Viscosity and Crystallization
Mold powders used in the continuous casting of steel contain the harmful CaF2 as a main substance developing toxic gases such as SiF4 and HF at elevated temperatures. In this study, three samples of I1, I2 and I3, which contained gypsum free Portland cement clinker with different percentages of Fe2O3 (5.68, 6.83, 8.02 ...
متن کاملSimulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel
The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, in order to calculate the cooling curves. In this regard, the microstructure and hardness for each arbitrary point within the mill liner's bulk could be predicted based on ...
متن کاملNEW METHOD FOR LIFE ASSESSMENT OF 1%CR-0.5% MO LOW ALLOY STEEL ON THE BASE OF GRAIN BOUNDARY CREEP CAVITATIONS
Life assessment on the base of grain boundary creep cavitation of 1%Cr - 0.5%Mo low alloy steel has been discussed in this paper. Since microstructural degradation is one of the most important mechanisms that affects creep life, it is necessary to assess microstructural damage in order to estimate the life. Microstructural damage within the grain boundaries is a continuous phenomena starting fr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1965
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.14.879