Studies on the Melamine-Formaldehyde Resins
نویسندگان
چکیده
منابع مشابه
Synthesis and Thermal Degradation Studies of Melamine Formaldehyde Resins
Melamine formaldehyde (MF) resins have been synthesized at different reaction temperature and pH values. Different molar ratios of melamine and formaldehyde were used to synthesize the corresponding resins. The prepared resin samples were characterized by using molecular weight determination viscometry and thermogravimetric analysis (TGA). The maximum percentage of solid content (69.7%) was obt...
متن کاملDevelopment of melamine modified urea formaldehyde resins based on strong acidic pH catalyzed urea formaldehyde polymer
To upgrade the performance of urea-formaldehyde (UF) resin bonded particleboards, melamine modified urea-formaldehyde (MUF) resins based on strong acidic pH catalyzed UF polymers were investigated. The study was conducted in a series of two experiments: 1) formulation of MUF resins based on a UF polymer catalyzed with strong acidic pH and 2) determination of the effects of increased melamine co...
متن کاملLiquefied Wood as a Partial Substitute of Melamine-urea- Formaldehyde and Urea-formaldehyde Resins
Maritime pine (Pinus pinaster) sawdust was used to produce liquefied wood by the polyhydric method with acid catalysis. The process was optimized to produce the highest amount of liquefied wood. Wood liquefied at 160oC for 90 min was used in the adhesion tests. The bond strength of veneer glued with ureaformaldehyde and melamine-urea-formaldehyde resins and several mixtures of liquefied wood wi...
متن کاملThe Effects of Adding Melamine at Different Resin Synthesis Points of Low Mole Ratio Urea-Melamine- Formaldehyde (UMF) Resins
Low mole ratio urea-melamine-formaldehyde (UMF) resins synthesized with 2.5% and 5.0% melamine levels added at the beginning, middle, and end points of the first alkaline step of the typical urea-formaldehyde (UF) resin synthesis procedure were compared with typical UMF resins synthesized with melamine additions made at the final alkaline step. Various resin analysis, particleboard preparation,...
متن کاملUrea-formaldehyde Adhesive Resins*
Approximately 1 million metric tons of urea-formal-dehyde resin are produced annually. More than 70% of this urea-formaldehyde resin is used by the forest products in-*This information was written and prepared by a U.S. Government employee on official time and it is, therefore, in the public domain and not subject to copyright.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi Kagaku
سال: 1958
ISSN: 1884-8079,0023-2556
DOI: 10.1295/koron1944.15.327