Studies on the Circular-Arc-Toothed Gear Pumps : Comparison with the Herringbone Gear Pumps
نویسندگان
چکیده
منابع مشابه
Models for Flow Rate Simulation in Gear Pumps: A Review
Gear pumps represent the majority of the fixed displacement machines used for flow generation in fluid power systems. In this context, the paper presents a review of the different methodologies used in the last years for the simulation of the flow rates generated by gerotor, external gear and crescent pumps. As far as the lumped parameter models are concerned, different ways of selecting the co...
متن کاملA novel approach for predicting the operation of external gear pumps under cavitating conditions
Article history: Received 6 August 2013 Received in revised form 20 January 2014 Accepted 19 March 2014 Available online 22 April 2014
متن کاملTorque Analysis of Perpendicular Magnetic Gear with High Gear Ratio
This paper presents design and analysis of torque and flux density in perpendicular magnetic gear with different magnetic materials, dimensions and air gap. The results were compared to each other. This type of gear offers both high gear ratio and high torque. Moreover the low speed side is connected to prime mover and high speed side is connected to load after analysis, which is sui table for ...
متن کاملSliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory
Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...
متن کاملReplacing Gas-Assisted Glycol Pumps with Electric Pumps
Gas-assisted pumps are the most common circulation pumps in remote areas that do not have an electrical power supply. They are basically pneumatic gas driven pumps, specially designed to take advantage of the energy of high-pressure natural gas entrained in the rich (wet) TEG leaving the gas contactor. Additional high-pressure wet production gas is necessary for mechanical advantage, and theref...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1968
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.34.541