Studies on Solvent Extraction Using Radioactive Isotope. V. Solvent Extraction of Sr-Y-90 with TTA-Benzene

Contents 1 The Possibility of using Solvent - Solvent Extraction

This report investigates the use of solvent-solvent extraction for the secondary concentration of lead and thorium. The extraction reagents investigated in this report are: For the lead extraction: diethlyammonium diethyldithiocarbamate (DDDC) For the thorium extraction: trioctylphosphinc oxide (TOPO) and di-(2-ethylhexyl)phosphoric add (HDEHP). For all of the extractions 2-octanone was used as...

Solvent extraction of arsenic(V) with dispersed ultrafine magnetite particles.

The solvent extraction of arsenic(V) was investigated using heptane containing ultrafine magnetite particles and hydrophobic ammonium salt. Arsenic(V) was favorably extracted from aqueous solutions of pH ranging over 2-7, where the distribution ratio (10(3)) was independent of the pH. Although the addition of alkyl ammonium salt improved the phase separation, no notable influence was observed o...

Magnetic solvent extraction

4 Solvent Extraction Equilibria

The ability of a solute (inorganic or organic) to distribute itself between an aqueous solution and an immiscible organic solvent has long been applied to separation and purification of solutes either by extraction into the organic phase, leaving undesirable substances in the aqueous phase; or by extraction of the undesirable substances into the organic phase, leaving the desirable solute in th...

Diluent effects in solvent extraction

The fact that the choice of organic diluent is important for a solvent extraction process goes without saying. Several factors, such as e.g. price, flash point, viscosity, polarity etc. each have their place in the planning of a solvent extraction system. This high number of variables makes the lack of compilations concerning diluent effects to an interesting topic. Often the interest for the r...