Studies on Maleic Anhydride Grafted Reclaimed Rubber/Acrylonitrile Butadiene Rubber Blends
نویسندگان
چکیده
منابع مشابه
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...
متن کاملAn investigation on chloroprene-compatibilized acrylonitrile butadiene rubber/high density polyethylene blends
Blends of acrylonitrile butadiene rubber/high density polyethylene (NBR/HDPE) compatibilized by Chloroprene rubber (CR) were prepared. A fixed quantity of industrial waste such as marble waste (MW, 40 phr) was also included. The effect of the blend ratio and CR on cure characteristics, mechanical and swelling properties of MW-filled NBR/HDPE blends was investigated. The results showed that the ...
متن کاملoxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
in this research, high oxygen-barrier films were organized based on low-density polyethylene (ldpe)/ ethylene vinyl alcohol (evoh)/ polyethylene-grafted maleic anhydride (ldpe-g-ma) compatibilizer. the effects of 10–30 wt. % evoh and 0–10 wt. % ldpe-g-ma loadings on the properties of final films were evaluated. the morphology of specimens was observed by using scanning electron microscopy (sem)...
متن کاملSynthesis and Characterization of Acrylic acid Grafted Styrene- Maleic anhydride Copolymer
Modification of Styrene-maleic anhydride copolymer, synthesized in toluene using benzoyl peroxide (BPO) as initiator, through graft copolymerization of hydrophilic monomer, acrylic acid, (AAc), has been carried out in aqueous medium by chemical and gamma radiation methods. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of different reaction paramete...
متن کاملPreparation and Characterization of Poly(Lactic Acid)-g-Maleic Anhydride[thinsp]+[thinsp]Starch Blends
Poly(lactic acid) (PLA) and starch copolymers are obtained by reactive blending varying the starch compositions from 0 to 60%. PLA is functionalized with maleic anhydride (MA), obtaining PLA-g-MA copolymers using dicumyl peroxide as an initiator of grafting in order to improve the compatibility and interfacial adhesion between the constituents. PLAþ starch blends without a compatibilizer do not...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Rubber, Plastics and Recycling Technology
سال: 2003
ISSN: 1477-7606,1478-2413
DOI: 10.1177/147776060301900303