Studies on Characteristics of the Room Temperature Molten Salt AlCl3-1-Butylpyridinium Chloride
نویسندگان
چکیده
منابع مشابه
Conductivity, Electrodeposition and Magnetic Property of Cobalt(II) and Dysprosium Chloride in Zinc Chloride-1-Ethyl-3-Methylimidazolium Chloride Room Temperature Molten Salt
Electric conductivity of the molten zinc chloride-1-ethyl-3-methylimidazolium chloride phases has been measured by a computerized system using the d.c. four-probes method. The sequence of the conductivities for the different component melts is ZnCl2-EMIC > ZnCl2-EMIC-CoCl2 > ZnCl2EMIC-DyCl3 > ZnCl2-EMIC-CoCl2-DyCl3. The results may be explained in terms of the viscosity increase due to the comp...
متن کاملLOW TEMPERATURE MOLTEN SALT SYNTHESIS OF NANO CRYSTALLINE MgAl2O4 POWDER
Abstract: composition of MgO and nano boehmite. The reactant and potassium chloride, as the reaction media, were fired at800-1000 °C at different dwell times (0.5-5 h) in the ambient atmosphere. After washing and filtration, the spinel nanopowder was characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) techniques. It was demonstrated tha...
متن کاملElectrodeposition of Zinc From Low Temperature Molten Salt Electrolyte: Part I-Imidazole And Zinc-Chloride Electrolyte
Our R & D work was focused on the electro deposition of Zinc from imidazole as low temperature molten salt (LTMS) electrolyte with zinc chloride as a supporting salt at <100o C., without required controls from the previous existing non aqueous baths as well additive free system for the zinc deposition. Surface morphological studies and crystallographic orientation results were evaluated.
متن کاملIon-transfer voltammetry at a polarized room-temperature molten salt/water interface.
Tetraoctylammonium cation forms a room-temperature molten salt (RTMS) with 2,4,6-trinitrophenolate anion. The RTMS is immiscible with water (W) and forms a stable RTMS/W interface. It has been shown that the RTMS/W interface can be electrochemically polarized. A well-defined voltammetric wave due to the transfer of thiocyanate ion across the RTMS/W interface was observed within the potential wi...
متن کاملSecondary aluminium-iron (III) chloride batteries with a low temperature molten salt electrolyte
Secondary aluminium-iron (III) chloride batteries using a low temperature molten salt electrolyte were constructed and tested. Discharge current densities were in the range 5 to 100mA ( ~ 1 to 2 0 m A c m 2 ; ~ C/4 to 5C); charging currents were 5 m A (C/4 toC/2). Utilization of the positive electrode reactant was low due to the discharge rates and loading procedure. The mode for self discharge...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Proceedings Volumes
سال: 1992
ISSN: 0161-6374,2576-1579
DOI: 10.1149/199216.0438pv