STUDIES ON BALL BEARING STEELS (II)

Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method

In this work, characteristics of various ball bearing parameters are studied under different loads and rotational speeds. By using Dimensional Analysis (DA), dimensionless parameters are computed which provides solution for a group of parameters. This analysis can be accomplished by using the Buckingham π-theorem. DA leads to reduction of the number of independent parameters involved in a probl...

Ball-Bearing Motor

The discovery/invention of the ball-bearing motor is attributed to Milroy [1]. It has been discussed several times, with conflicting explanations [2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]. This solution is a much simplified version of that given in [7]. Because the motor is weak, it is helpful to reduce friction on the axle by connecting the high-current lead to the outer races of the ba...

B Ball Bearing ▶ Bearing Bar Extrusion

Introduction Bar extrusion is a process in which a block of metal (billet) is forced to flow by compression through a tool (die) opening of a smaller crosssectional area than that of the original billet. There are two basic types of bar extrusion: direct and indirect. The most important and common method used is the direct extrusion (Lange 1988). Figure 1 shows the principle of direct bar extru...

Effects of Heat Treatments on Steels for Bearing Applications

Y Studies on Austenitic Stainless Steels

Abstract--In this investigation, the fracture surfaces of SS 304 and SS 316 austenitic steels were analysed using the X-ray fractography technique. In both cases, a decrease in the austenite content was observed at the fracture surface as a result of deformation induced martensite, indicating a linear relation with Km~ within the stable crack growth region. The presence of this martensite was f...