Structures and properties of Ti alloys after double implantation
نویسندگان
چکیده
منابع مشابه
TRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS
Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...
متن کاملOptical properties and electronic structures of B2 and B19′ phases of equiatomic Ni-Ti alloys
The dielectric functions of equiatomic Ni-Ti alloys were measured by spectroscopic ellipsometry in the energy range of 1.5–5.4 eV at ∼423 and at ∼25 K. The peak at ∼2.26 eV in the B19′ (monoclinic structure) optical conductivity spectrum has a slightly larger magnitude than in the B2 (cubic CsCl structure) phase, while the shoulder at ∼3.5 eVbecomes weaker and almost indiscernible upon martensi...
متن کاملMechanical properties and grindability of dental cast Ti-Nb alloys.
Aiming at developing a dental titanium alloy with better mechanical properties and machinability than unalloyed titanium, a series of Ti-Nb alloys with Nb concentrations up to 30% was made. They were cast into magnesia-based molds using a dental casting machine and the mechanical properties and grindability of the castings were examined. The hardness of the alloys with Nb concentrations of 5% a...
متن کاملMechanical properties and microstructures of dental cast Ti-Ag and Ti-Cu alloys.
In this study, experimental Ti-Ag alloys (5, 10, and 20 mass% Ag) and Ti-Cu alloys (2, 5, and 10 mass% Cu) were made in an argon-arc melting furnace. The alloys were cast into magnesia molds using an argon gas-pressure dental casting machine, and the mechanical properties and microstructures of the castings were investigated. As the concentration of silver or copper in the alloys increased, the...
متن کاملInfluence of Heat Treatment on Properties of Ti-nb Alloys
L. Kuncicka, J. Kliber, VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic P. Stepan, VŠB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic I. Mamuzic, Croatian Metallurgical Society, Zagreb, Croatia Ti-Nb alloys are of a large potential for industrial, as well as biomedical utilisation. Ox ygen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Vacuum
سال: 2009
ISSN: 0042-207X
DOI: 10.1016/j.vacuum.2009.01.072