Structures and Properties of Plasma Electrolytic Oxidation Coatings on Titanium and Titanium Alloys
نویسندگان
چکیده
منابع مشابه
Comparative Sem and Edx Analysis of Surface Coatings Created on Niobium and Titanium Alloys after Plasma Electrolytic Oxidation (peo)
Original scientific paper In the paper, the SEM and EDS study results of the surface coatings formed on the niobium and titanium alloys (TNZ, NiTi, Ti6Al4V) after the Plasma Electrolytic Oxidation (PEO), also known as Micro Arc Oxidation (MAO), are described. For the experiment of the PEO treatment, a non-conventional electrolyte, based on the concentrated orthophosphoric acid, was used. Copper...
متن کاملDevelopment of Oxidation Protection Coatings for Gamma Titanium Aluminide Alloys
Metallic material systems play a key role in meeting the stringent weight and durability requirements for reusable launch vehicle (RLV) airframe hot structures. Gamma titanium aluminides (γTiAl) have been identified as high-payoff materials for high-temperature applications. The low density and good elevated temperature mechanical properties of γ-TiAl alloys make them attractive candidates for ...
متن کاملOsseointegration improvement by plasma electrolytic oxidation of modified titanium alloys surfaces.
Titanium (Ti) is a material frequently used in orthopedic applications, due to its good mechanical properties and high corrosion resistance. However, formation of a non-adherent fibrous tissue between material and bone drastically could affect the osseointegration process and, therefore, the mechanical stability of the implant. Modifications of topography and configuration of the tissue/materia...
متن کاملPlasma Electrolytic Oxidation Coatings on Lightweight Metals
Lightweight metals, e.g. aluminum (Al), magnesium (Mg), titanium (Ti) and their alloys are of great importance for applications in various machinery and transportation system, espe‐ cially in aerospace and automobile products due to their high strength-to-weight ratio and superior physical and chemical performances. However, their poor tribological properties, such as low wear resistance, high ...
متن کاملSEM, EDS and XPS Analysis of the Coatings Obtained on Titanium after Plasma Electrolytic Oxidation in Electrolytes Containing Copper Nitrate
In the paper, the Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Photoelectron Spectroscopy (XPS) results of the surface layer formed on pure titanium after plasma electrolytic oxidation (micro arc oxidation) at the voltage of 450 V are shown. As an electrolyte, the mixture of copper nitrate Cu(NO₃)₂ (10-600 g/L) in concentrated phosphoric acid H₃PO...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2018
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.69.648