Structure-property correlation on AA 2219 aluminium alloy weldments
نویسندگان
چکیده
منابع مشابه
Localized Corrosion on 2219 Aluminium Alloy Coated with a Titanium Based Conversion Coating
High strength aluminium alloys are widely employed in aerospace applications. However specific environmental conditions may trigger corrosion and therefore these alloys require additional protection. Most current conversion coatings used for this purpose are Cr(VI) based, and thus environmentally undesirable. A possible replacement is a Ti based coating, Nabutan STI/310. The aim of this work is...
متن کاملLOCALIZED CORROSION OF A 2219 ALUMINIUM ALLOY EXPOSED TO A 3.5% NaCl SOLUTION
This work is focused on the role of intermetallics in pitting corrosion of Al2219 alloy. Second phase particles were characterized by AES, SAM and EDX. Their behaviour in a solution of NaCl was investigated as a function of exposure time. The results confirmed the cathodic nature of the intermetallics with respect to the aluminium matrix. Corrosion products rich in aluminium and oxygen were fou...
متن کاملEvaluation of Mechanical Properties of Aluminium Alloy AA 6061(HE-20)
The general manufacturing objective during the fabrication of automotive, structural and aerospace components, particularly through flow forming process is to achieve predefined product quality characteristics and mechanical properties with process cost and time constraints. The current state of the economy and the consequent market pressure has forced vehicle manufacturers to simultaneously re...
متن کاملCORROSION BEHAVIOUR OF A 2219 ALUMINIUM ALLOY TREATED WITH A CHROMATE CONVERSION COATING EXPOSED TO A 3.5 % NaCl SOLUTION
This study investigates the formation of a chromate conversion coating at Al-Cu-Fe-Mn intermetallic sites of an Al2219 alloy and the corrosion initiation at these sites in a 3.5 % NaCl solution, using SEM, AES and EDX. Changes in the surface chemistry were monitored after progressive exposures to the solution up to 42 hours. The coating was found to be thinner and more defective on the intermet...
متن کاملCreep Aging Behavior Characterization of 2219 Aluminum Alloy
In order to characterize the creep behaviors of 2219 aluminum alloy at different temperatures and stress levels, a RWS-50 Electronic Creep Testing Machine (Zhuhai SUST Electrical Equipment Company, Zhuhai, China) was used for creep experiment at temperatures of 353~458 k and experimental stresses of 130~170 MPa. It was discovered that this alloy displayed classical creep curve characteristics i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 1996
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02744827