Structure-properties relationship in TRIP type bainitic ferrite steel austempered at different temperatures
نویسندگان
چکیده
منابع مشابه
Stabilisation of ferrite in hot rolled d-TRIP steel
A steel has recently been designed to benefit from the deformation induced transformation of retained austenite present in association with bainitic ferrite. It has as its major microstructural component, dendrites of d-ferrite introduced during solidification. The d-ferrite replaces the allotriomorphic ferrite present in conventional alloys of this kind. The authors examine here the stability ...
متن کاملPreparation and Mechanical Properties of Nano/Ultrafine Bainitic Structure in AISI 52100 Steel
The development of nano/ultrafine bainitic structure in AISI 52100 steel was the goal of this study. For this purpose,the AISI 52100 the specimens were austenitized at 1050 °C for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. The austempered samples were characterized using field emissionscanning electron microscopy (FESEM), X-ra...
متن کاملDevelopment of Ultrafine Bainitic Structure in AISI 431 Stainless Steel
The development of ultrafine bainitic structure in AISI 431 stainless steel was the goal of this study. For this purpose, the AISI 431 specimens were austenitized at 1100 °C for 60 min followed by low-temperature austempering treatment at different temperatures and times. Austempered samples were characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (X...
متن کاملExperimental Evidence for Non-Cubic Bainitic Ferrite
The first evidence is provided for the existence of a tetragonal or slightly orthorhombic unit cell of bainitic ferrite. It supports the hypothesis that the excess carbon that persists in the ferrite, which is in contact with austenite, is a consequence of an increased solubility due to the change in symmetry from the conventional cubic unit cell. The deviations from the cubic cell are maintain...
متن کاملNanostructured bainitic steel obtained by powder metallurgy approach: structure, transformation kinetics and mechanical properties
A PM approach is investigated in the context of extremely fine low temperature bainitic steels with a reasonable combination of ultimate tensile strength and uniform elongation. The strategy consists of three steps. First, ball milling is used for mechanical alloying and to create a large density of interfaces prior to sintering. In the second step, spark plasma sintering is used as a rapid con...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical and Materials Engineering
سال: 2017
ISSN: 1823-0334,2198-2791
DOI: 10.1186/s40712-017-0071-9