Structure of Zinc Coating on Steels Formed by Diffusion Saturation in Nitrogen-Containing Atmosphere
نویسندگان
چکیده
Diffusion technique of metallization is applied for receiving zinc coatings on low-carbon steel with transitional zone. Structure diffusion layers after saturation 09Mn2Si in ammonia at different temperatures examined. Effects temperature thickness are discovered. Process 600⁰C forms high strengthening level and smooth microhardness profiles. Elements (Fe, Zn, N) spectrums analyzed, phase composition coating zone determined.
منابع مشابه
Evaluation of Nitrogen Diffusion in Plasma Nitrided Iron by Various
Diffusion of nitrogen in plasma nitrided iron and structural evolution during the nitriding process were evaluated by several characterization techniques including optical microscopy (OM), microhardness depth profiling (HDP), scanning electron microscopy (SEM), x-ray diffraction (XRD), glow discharge optical emission spectroscopy (GDOES), and secondary ion mass spectroscopy (SIMS). Plasma ni...
متن کاملCytotoxicity study of plasma-sprayed hydroxyapatite coating on high nitrogen austenitic stainless steels.
Stainless steel has been frequently used for temporary implants but its use as permanent implants is restricted due to its low pitting corrosion resistance. Nitrogen additions to these steels improve both mechanical properties and corrosion resistance, particularly the pitting and crevice corrosion resistance. Many reports concerning allergic reactions caused by nickel led to the development of...
متن کاملthe effects of changing roughness on the flow structure in the bends
flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...
Effect of a Coating Induced Residual Stress on Magnetic Domain Structure in Non-Oriented Electrical Steels
To produce the magnetic core of the electric motors, non-oriented electrical steels (NOES) are used. Recently much attention has been focused on optimizing the efficiency of electric motors and, as such, various materials aspects of NOES are being re-examined. Typically, NOES are used in the form of laminations (~200-1000 μm thick) with an electrically insulating coating applied to the surface....
متن کاملthe structure of lie derivations on c*-algebras
نشان می دهیم که هر اشتقاق لی روی یک c^*-جبر به شکل استاندارد است، یعنی می تواند به طور یکتا به مجموع یک اشتقاق لی و یک اثر مرکز مقدار تجزیه شود. کلمات کلیدی: اشتقاق، اشتقاق لی، c^*-جبر.
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC web of conferences
سال: 2021
ISSN: ['2261-236X', '2274-7214']
DOI: https://doi.org/10.1051/matecconf/202134602022