Structure Evolution upon Heating of Mechanically Alloyed Ti<SUB>34</SUB>Zr<SUB>11</SUB>Cu<SUB>47</SUB>Ni<SUB>8</SUB> Powders

Magnetic hysteresis of mechanically alloyed Smâ•fiCo nanocrystalline powders

MgB2 superconducting tapes with mechanically alloyed precursor powders as a possible alternative to NbTi

XANES of Mechanically Alloyed Y-Fe System

We have measured X-ray absorption near edge structure (XANFS) of mechanically alloyed YzFe and YFez system as a fundion of milling time. An amorphous phase is obtained by mechanical alloying for 100 hours in the YzFe system and for 500 hours in the YFez system. In both systems the intensity of Fe Is-4pn transition grows up significantly with increasing the milling time and approaches to that of...

Degradation of TATP, TNT, and RDX Using Mechanically Alloyed Metals

Sintering Properties of Mechanically Alloyed Ti-5Al-2.5Fe

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...