Structure-dependent electrochemical response characteristics of antimony tin oxide nanoparticle-based porous electrodes
نویسندگان
چکیده
منابع مشابه
Electrochemical degradation of 4-chlorophenol at nickel-antimony doped tin oxide electrode.
The effectiveness of a novel nickel-antimony doped tin oxide electrode for electrochemical degradation of organic pollutants was investigated using 4-chlorophenol (4-CP) as a model toxic organic. The experimental results demonstrate that the optimal Ni content was at Ni:Sn=1:500 in atomic ratio in the precursor coating solution, whereas the Sb:Sn ratio was set at 8:500. Using the electrode prep...
متن کاملOptoelectric biosensor using indium-tin-oxide electrodes.
The use of an optically thin indium-tin-oxide (ITO) electrode is presented for an optoelectric biosensor simultaneously recording optical images and microimpedance to examine time-dependent cellular growth. The transmittance of a 100 nm thick ITO electrode layer is approximately the same as the transmittance of a clean glass substrate, whereas the industry-standard Au(47.5 nm)/Ti(2.5 nm) electr...
متن کاملTin Oxide Nanorod Array-Based Electrochemical Hydrogen Peroxide Biosensor
SnO2 nanorod array grown directly on alloy substrate has been employed as the working electrode of H2O2 biosensor. Single-crystalline SnO2 nanorods provide not only low isoelectric point and enough void spaces for facile horseradish peroxidase (HRP) immobilization but also numerous conductive channels for electron transport to and from current collector; thus, leading to direct electrochemistry...
متن کاملElectrochemical Detection of Dopamine Using 3D Porous Graphene Oxide/Gold Nanoparticle Composites
The detection of dopamine in a highly sensitive and selective manner is crucial for the early diagnosis of a number of neurological diseases/disorders. Here, a report on a new platform for the electrochemical detection of dopamine with a considerable accuracy that comprises a 3D porous graphene oxide (pGO)/gold nanoparticle (GNP)/pGO composite-modified indium tin oxide (ITO) is presented. The p...
متن کاملGeneration of Highly Ordered Porous Antimony-Doped Tin Oxide Film by A Simple Coating Method with Colloidal Template
An ordered porous antimony-doped tin oxide (ATO) film was successfully prepared using a simple coating process with colloidal templates. The facile production was effective when a combination of 16-nm ATO (as a model of an inorganic nanoparticle) and polystyrene (PS) spheres (as a model of the template) weresimply coated to produce a composite ATO/PS film. Heat treatment was then used to remove...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIP Advances
سال: 2020
ISSN: 2158-3226
DOI: 10.1063/1.5120089