Structure and surface composition of NiCr sputtered thin films
نویسندگان
چکیده
منابع مشابه
Structure and magnetic properties of sputtered thin films of Fe0M79Ge0.21
Films of Fee.79Geez1 with thicknesses of 300 nm were synthesized by ion beam sputtering, and were annealed at temperatures from 200 to 550 “C. The materials were characterized by x-ray diffractometry, Mdssbauer spectrometry, vibrating sample magnetometry, ferromagnetic resonance spectrometry, and electrical resistivity measurements. The as-prepared materials comprised chemically disordered bee ...
متن کاملarchitecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولStructure and morphology of magnetron sputtered CoCr thin films
The growth characteristics of magnetron sputtered Co-22%Cr thin films on amorphous glass or carbon substrates have been investigated utilizing transmission electron microscopy, X-ray diffraction and electrical resistivity measurements. Results indicate that the initial deposit is “amorphous”. but that small crystallites form before the film reaches 5 nm film thickness. By 10 nm, well oriented g...
متن کاملSurface roughness and in-plane texturing in sputtered thin films
Real surfaces are not flat on an atomic scale. Studying the effects of roughness on microstructural evolution is of relevance because films are sputtered onto nonideal surfaces in many applications. To this end, amorphous rough substrates of two different morphologies, either elongated mounds or facets, were fabricated. The microstructural development of films deposited onto these surfaces was ...
متن کاملMicrowave Surface Resistance of Reactively Sputtered NbN Thin Films
The surface resistance of niobium nitride {NbN) thin films has been measured at 7. 78 and 10.14 GHz in the temperature range of 1.5 to 4.2 K. The films were reactively sputtered on sapphire substrates to a thickness of approximately 1 micron. The surface resistance was determined by measuring the quality factor (Q) of the TEo] 1 mode of a lead-plated copper cavity where the NbN served as one en...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2006
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos0602155p