Structure and Properties of Polyamide 11 Nanocomposites Filled with Fibrous Palygorskite Clay
نویسندگان
چکیده
منابع مشابه
PE and PP Clay Nanocomposites - Structure Modeling and Properties
The ability of commercial nanofillers Nanofil, Cloisite and by own way prepared MMT/ODA for PE and PP matrix was evaluated. Different types of mentioned type of nanofillers were added into polyethylene (PE) and polypropylene (PP) matrix in various concentrations. The amount of clays was calculated as 3 and 5 wt% to the weight of PE/PP. The PE/PP and nanofillers were mixed on a one screw KO Knea...
متن کاملNanocomposites of Polyamide-11 and Carbon Nanostructures: Development of Microstructure and Ultimate Properties Following Solution Processing
There is growing interest in the incorporation of nanoparticles into engineering polymers to improve various functional properties. However, ultimate properties of nanocomposites are affected by a large number of factors including the microstructural distributions that are generated during processing. In this work, polyamide-11 (PA-11) (also known as nylon-11) nanocomposites are generated with ...
متن کاملClay-Epoxy Nanocomposites: Processing and Properties
The work described in this paper is focused on evaluating the effect of the processing method and nanoclay (montmorillonite) content on the tensile, compressive, and impact properties of clay-epoxy nanocomposites. Nanocomposites are synthesized by two methods: mechanical mixing and shear mixing. Both these methods are capable of producing bulk quantities of clay-epoxy nanocomposites. X-ray diff...
متن کاملPreparation and Mechanical Properties of Compositionally Graded Polyethylene/Clay Nanocomposites
This paper presents the preparation and mechanical properties of compatibilized compositionally graded Polyethylene/ low density polyethylene (LDPE)/ modified montmorillonite (MMT) nanocomposites prepared by solution and melt mixing techniques. Use of polyethylene glycol as compatibilizer improves compatibility of modified montmorillonite and low density polyethylene. Comparisons between two t...
متن کاملProperties of Hdpe/clay/wood Nanocomposites
Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and then injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites were investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding proced...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Renewable Materials
سال: 2019
ISSN: 2164-6341
DOI: 10.32604/jrm.2019.00136