STRUCTURAL STRESS RELAXATION IN STAINLESS INSTABILITY STEEL
نویسندگان
چکیده
منابع مشابه
Relaxation Peaks of Cold Worked 304l Stainless Steel
In this investigation internal friction of cold worked 304L austenitic stainless steel was measured and the new peaks (PlIP2,P3) were found. The height of those peaks increased with cold work degree. The temperature of the main peak P3 was 33513340K at the frequency of -1,000Hz. The activation energies and frequency factors were obtained from peak shift. The values were 0.4evl 0.4evl 0.6ev and ...
متن کاملThe Interaction between Hydrogen and Surface Stress in Stainless Steel
This paper reveals the interaction between hydrogen and surface stress in austenitic stainless steel by X-ray diffraction stress measurement and thermal desorption analysis before and after being charged with hydrogen. The surface residual stress was varied by surface finishing using several disc polishing agents. The obtained results show that the residual stress near surface had a significant...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملStress relaxation properties of prestressed steel wires
In this study, stress relaxation phenomenon has been examined generally. Experiments were carried out on carbon steel wires with diameter 8 mm which are particularly used in prestressed concrete composites. Thermomechanically heat treatment was also carried out on this wire in order to relieve the residual stresses accumulated after the cold work. The heat treatment temperature and the stretch ...
متن کاملStainless Steel Type 316Ti
Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Automobile Transport
سال: 2017
ISSN: 2309-981X,2219-8342
DOI: 10.30977/at.2219-8342.2017.40.0.153