Structural modification of tantalum crystal induced by nitrogen ion implantation
نویسندگان
چکیده
منابع مشابه
Surface modification of Ti-4Al-2V alloy by nitrogen implantation
Ti-4Al-2V is a new type of alpha titanium alloy that suitable for the application in high-temperature and high-pressure water/steam environment. Ti-4Al-2V can be used in marine engineering, nuclear power industry. In this paper the surface characterization of the Ti-4Al-2V implanted with 75 keV nitrogen with fluences of 3 × 1017 and 8 × 1017 N+/cm2 is investigated by glancing-incidence XRD, XPS...
متن کاملEnhancement of wanlongmycin production by nitrogen ion beam implantation
In an attempt to obtain an industrial strain with higher yield of wanlongmycin, the wild strain Streptomyces griseovariabilis GAAS2507 was mutated by a novel mutagen, nitrogen ion beam with energy of 20 kilo electron volts (KeV) and dose ranging from 7.80 x 10 to 2.86 x 10 ions/cm. One mutant strain WN939 was obtained. Its yield of wanlongmycin reached 271.24 μg/mL, which was 82.10% higher than...
متن کاملInfluence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates
Ion implantation is a surface modification technology to produce new material on the surface by impingement of high energy ions from the ion accelerator. In this work, AISI 304 stainless steels were coated with 90 nm Ni film by electron beam deposition and implanted by a flow of 5×1017 N cm−2 at 400 K temperature with different implantation energies of 10, 20, 30 and 40 keV. The prepared sample...
متن کاملDeformation induced grain rotations in single crystal tantalum
Validation studies of crystal plasticity fi nite element models typically compare model predictions of strain fi elds withexperimental measurements; often ignored are the grain rotations predicted by the model. Accurate predictions ofcrystallographic rotations are necessary for trustworthy predictions of strain fi elds, deformed texture, and failure.This is especially important ...
متن کاملHighly tunable formation of nitrogen-vacancy centers via ion implantation
(Received 5 July 2014; accepted 1 August 2014; published online 12 August 2014) We demonstrate highly tunable formation of nitrogen-vacancy (NV) centers using 20 keV 15Nþ ion implantation through arrays of high-resolution apertures fabricated with electron beam lithography. By varying the aperture diameters from 80 to 240 nm, as well as the average ion fluences from 5 10 to 2 10 ions/cm, we can...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2016
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-016-1212-0