Structural heavy gauge 70 and 80 kgf/mm2 hot rolled steels with excellent shear-edge formability.
نویسندگان
چکیده
منابع مشابه
Plastometric Study of Hot Formability
P. Kawulok, I. Schindler, R. Kawulok, S. Rusz, P. Opěla, J. Kliber, M. Kawuloková VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic Z. Solowski, K.M. Čmiel Třinecké železárny a.s., Czech republic Formability of hypereutectoid C-Mn-Cr-V steel in hot condition was investigated with use of plastometric methods. A wide range of deformation temper...
متن کاملVanadium in Cold-rolled Sheet Steels
In hot rolled products, which are the subject of other presentations here, vanadium has been used for many years in high strength products, often in combination with other microalloying additions such as niobium or titanium. Vanadium can provide important contributions via both precipitation strengthening and ferrite grain refinement (due to austenite conditioning during thermomechanical proces...
متن کاملGauge/String Duality, Hot QCD and Heavy Ion Collisions
Over the last decade, both experimental and theoretical advances have brought the need for strong coupling techniques in the analysis of deconfined QCD matter and heavy ion collisions to the forefront. As a consequence, a fruitful interplay has developed between analyses of strongly-coupled non-abelian plasmas via the gauge/string duality (also referred to as the AdS/CFT correspondence) and the...
متن کاملHot Formability of Particle reinforced Ti - Alloys
Titanium alloys exhibit mechanical and physical properties that fit structural applications demanding light-weight, corrosion resistance and biocompatibility. Ceramic reinforcements can further improve some of these mechanical properties, such as wear resistance, specific stiffness and specific strength. In comparison to continuous reinforced titanium alloys, the particle reinforced alloys (PRT...
متن کاملDesign and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations
In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the Japan Institute of Metals
سال: 1988
ISSN: 0021-4426,1884-5835
DOI: 10.2320/materia1962.27.278